For more information, please contact your local North River Boats dealership.
- 1026 – Endurance Aft station helm, console only
- 1026A – Endurance Aft station helm, twin engine
- 1045 – Plano storage inside console
- 1050 – Beaching plate
- 1101 – Toe kick, welded
- 1103 – Crab pot protector (Starboard only)
- 1200E – Bracket, offshore with 1/2″ plate (Over 800 HP, twin engine)
- 1220 – Bracket, welded swim deck kicker (Port)
- 1270 – Brackets, welded down rigger (Pair at FWD stern rail)
- 1300 – Inside Passage bulkhead with footrest riser & extended sleeper cushion. (Port only) Curtain replaces Vberth doors & bulkhead.
- 1455 – Cabin aft overhang, extended to 36″ center length
- 1500 – Door, walk thru bow (Cuddy & V-berth eliminated)
- 1530 – Door, side boarding (Port)
- 1542 – Trim lip, aluminum at rear cowling
- 1545 – Door, transom boarding (Starboard)
- 1621A – Rear cowling storage box, single with shoe box lid
- 1622A – Rear cowling storage box, two with shoe box lids
- 1622C – Transom cowling storage: Two drop ins, welded at top of cowling, with shoe box lids. One large – centered & one smaller – portside.
- 1760 – Fish boxes, side mounted floor w/ Forespar shut off ball valve (QTY 2)
- 1761A – Fish boxes, side mounted floor w/ Whale Gulper pumps (QTY 2)
- 1800 – Ladder, roof top (Port or Starboard)
- 1820 – Fold out steps, roof top access (QTY 2)
- 2121 – Rails, welded 6″ full wrap stern rails (Fore or aft of transom cowling)
- 2165C – Rod holder (QTY 3) welded to net holder (QTY 1) (Port and Starboard)
- 2200 – Rub Rails, (1 Port & 1 Starboard)
- 2200B – Rub rails, upper & lower (2 Port & 2 Starboard)
- 2220A – Rod holders, welded to fore side of roof top rod holder assembly (QTY 6)
- 2225 – Rose bud cleats, welded aft deck (QTY 4)
- 2255 – Storage rack, roof top
- 2285 – Insulate fish box sides and bottom (Per fish box option)
- 2600 – Frontier davit, at AKBH thru aft cabin overhang Includes: fabrication of davit, enclosure and paint (Dealer supplied winch / hauler)
- 2600B -Frontier davit, at AKBH thru aft cabin overhang Includes: fabrication of davit, enclosure and paint (Factory supplied Electro-Dyne winch / hauler)
- 2610 – Dinghy Hoist / Davit with winch #EMD2000SSRP (Thru aft cabin overhang) NOTE: Aft station option required.
- GX3 – Lone Star GX3 Drum Anchor Winch – up to 30ft.
- GX4 – Lone Star GX4 Drum Anchor Winch – up to 40ft.
- GX-A – Lone Star GX3 & GX4 Drum Anchor Winch Welded Provisions – ONLY
- SK-2 – Seakeeper 2, installed in floor fish hold (Shore poweroption required)
- SK-3 – Seakeeper 3, installed in floor fish hold (Shore power option required)
- SK-A – Welded structure provisions only for Dealer installed Seakeeper. Choose which Seakeeper (SK-2 or SK-3), for correct welded bracing.
- 5012 – Outrigger boss mounting plate (QTY. 1) – AFT roof overhang Port & Starboard
- 580 – Seat, flip up with snap on cushions (Each) (Aft deck)
- 625 – Swivels, installed on helm seats (Port & Starboard)
- 710 – Seat, Ocean Master
- 4060 – Color matched Zolatone (Cabin, gunwales & aft deck)
- 4115 – One color full side paint to chine
- 4135 – Two color side paint to chine
- 5089 – Alaskan Painted Trim Package – Lillith Zolatone w/flat clear (30-59)
- 3002 – Anchor windlass, Lofrans LION 1000 1/4″ horizontal gypsy
- 3002A – Foot switches for Lofrans LION 1000 windlass
- 3150A – Aerate, rear cowling storage box (Port)
- 3175 – Heater / defroster, Wallas Viking (7′ & 9′ cabin)
- 3180 – Heater / defroster, Wallas Spartan (11′ cabin)
- 3220 – Light, LED rear deck (QTY 1)
- 3230 – Light, LED courtesy at aisle way (QTY 4)
- 3240 – Switch panel, additional eight switch panel
- 3382 – Dual USB-A/C combo charger (Each) (Portside)
- 3400B – Pump, Whale Gulper pump for in-floor fish box (Twinengine)
- 3431 – Alarm, high water
- 3435 – Pump, bilge, second 2200 GPH bilge pump
- 3441 – Refrigerator, drawer Isotherm Cruise 65 SS, 2.3 Cu Ft., AC/DC (Requires 24″ cabinet)
- 3443 – Refrigerator, drawer Isotherm Cruise 130 SS w/Freezer, 4.6 Cu Ft., AC/DC NOTE: Requires 24″ cabinet and cannot have sink or stove above unit
- 3444 – Refrigerator, drawer Isotherm Cruise 85 SS, 3.0 Cu. Ft., AC/DC (Requires 24″ cabinet)
- 3600 – Shore power for 3 batteries with 3 bank charging system
- 3610 – Shore power and upgrade to 4 batteries with 4 bank charging system
- 3630 – Shore power, Freedom XC Pro Marine 2000w Inverter w/ 4 batteries & 4 bank charging system
- 3690 – Sink, large, w/ faucet & 10 gallon tank (Requires 24″ cabinet)
- 3691 – Sink, small, w/ faucet & 10 gallon tank (Requires 12″ cabinet)
- 3695 – Water tank, 18 gallon upgrade (Exch. 10 gallon tank)
- 3720B – Spotlight, Go Light Stryker with remote
- 3750 – Stove, Wallas Nordic Dt diesel with blower lid for cabin heat (Requires 24″ cabinet)
- 3751 – Diesel tank, 5 gal. aluminum tank w/ external fill & dash fuel gauge
- 3770 – Toilet, flushing centered inside cuddy
- 3820 – Water test, pre dealer delivery
- 3825 – Windshield wiper washer system
- 3830A – Fresh water system, wash down & 18 gallon tank
- 3830B – Fresh water system with sink & faucet, wash down & 18 gallon tank
- 3840 – Hot fresh water shower system, w/ S600EW heater, 30 gallon tank & drain sump
- 3845 – Head drain, with Attwood sump pump (Requires stand up head)
- 5006 – Bait tank plumbing and installation of Dealer supplied bait tank.
- 5006-A – Bait tank plumbing – Provisions Only.
- 5006-B – Bait tank wiring system to run continuously over night when at dock – Provisions Only.
- 5093 – SEP60 IMTRA Bow Thruster – 12V Proportional (27′-31′) – Includes: Joystick, GRP 27 Battery & 1 Bank charging system. (Requires shore power)
- 5094 – SEP80 IMTRA Bow Thruster – 12V Proportional (30′-37′) – Includes: Joystick, GRP 27 Battery & 1 Bank charging system. (Requires shore power)
- 5097 – Yamaha Integration for the IMTRA/Sleipner Proportional Bow Thrusters – Note: Bow Thruster
- SEP60/SEP80 option and Yamaha I-DES rigging options must be selected.
- 5099 – Seakeeper Ride 525 (27′-30′)
- 5100 – Seakeeper Ride 600 (31′-36′)
- 5103 – Seakeeper Ride Keypad with Ethernet Cable – Choose MFD Cable: (Garmin, Ray Marine, or Simrad)
- 5107 – Cabinet, aft deck port AKBH with sink, faucet and storage below
- 5108 – Sensar Marine – Boat Monitor with Bilge Sentry
- HS 2 – Hydraulic steering system, twin main engines
- HS YXC2 – Hydraulic steering system, Yamaha XC/XD twin engines
- 200G-36FB30 – 200 Gallon fuel tank & 36″ Fish hold (3000EXL with 9′ cabin only)
- 240G-24FB30 – 240 Gallon fuel tank & 24″ Fish hold (3000EXL with 9′ cabin only)
- 340G-0FB30 – 340 Gallon fuel tank & DELETE Fish hold (3000EXL with 9′ cabin only)
- 275G-36FB32 – 275 Gallon fuel tank & 36″ Fish hold (3200EXL with 9′ cabin only)
- 310G-24FB32 – 310 Gallon fuel tank & 24″ Fish hold (3200EXL with 9′ cabin only)
- 415G-0FB32 – 415 Gallon fuel tank & DELETE Fish hold (3200EXL with 9′ cabin only)
- 340G-36FB34 – 340 Gallon fuel tank & 36″ Fish hold (3400EXL with 9′ cabin only)
- 340G-24FB34 – 340 Gallon fuel tank & 24″ Fish hold (3400EXL with 9′ cabin only)
- 415G-0FB34 – 415 Gallon fuel tank & DELETE Fish hold (3400EXL with 9′ cabin only)
- 120G-40FB30 – 120 Gallon fuel tank & 40″ Fish hold (3000EXL with 11′ cabin only)
- 140G-36FB30 – 140 Gallon fuel tank & 36″ Fish hold (3000EXL with 11′ cabin only)
- 170G-24FB30 – 170 Gallon fuel tank & 24″ Fish hold (3000EXL with 11′ cabin only)
- 255G-0FB30 – 255 Gallon fuel tank & DELETE Fish hold (3000EXL with 11′ cabin only)
- 190G-40FB32 – 190 Gallon fuel tank & 40″ Fish hold (3200EXL with 11′ cabin only)
- 200G-36FB32 – 200 Gallon fuel tank & 36″ Fish hold (3200EXL with 11′ cabin only)
- 240G-24FB32 – 240 Gallon fuel tank & 24″ Fish hold (3200EXL with 11′ cabin only)
- 340G-0FB32 – 340 Gallon fuel tank & DELETE Fish hold (3200EXL with 11′ cabin only)
- 255G-40FB34 – 255 Gallon fuel tank & 40″ Fish hold (3400EXL with 11′ cabin only)
- 275G-36FB34 – 275 Gallon fuel tank & 36″ Fish hold (3400EXL with 11′ cabin only)
- 310G-24FB34 – 310 Gallon fuel tank & 24″ Fish hold (3400EXL with 11′ cabin only)
- 415G-0FB34 – 415 Gallon fuel tank & DELETE Fish hold (3400EXL with 11′ cabin only)
- 9′ CABIN
- CL E20A – (1) Storage seat box (60″) w/cushion and back rest (Aft of helm)
- CL E20G – (1) Galley cabinet (36″) & (1) Stand up flushing toilet (24″) Aisle facing
- 9′ CABIN PORT (Includes offset aisle way upgrade)
- CL E45I-P – (1) Dinette with fixed bench seats and back rests (24″ Table & footrest)
- 11′ CABIN (Includes 11′ length upgrade)
- CL E50G – (1) Galley cabinet (60″) & (1) Stand up flushing toilet (24″) Aisle facing
- CL E50H – (1) Galley cabinet (48″) & (1) Stand up flushing toilet (36″) Forward facing
- 11′ CABIN PORT (Includes 11′ length & offset aisle way upgrade)
- CL E60I-P – (1) Dinette with fixed bench seats and back rests (48″ Table & footrest)