FOR MORE DETAILS PLEASE CONTACT YOUR LOCAL NORTH RIVER BOATS DEALERSHIP
- 1015 – Aft station helm, console only
- 1020 – Aft steering helm, single engine
- 1020A – Aft steering helm, twin engine
- 1045 – Plano storage inside console
- 1050 – Beaching plate
- 1101 – Toe kick, welded
- 1103 – Crab pot protector (Starboard only)
- 1109 – Transom, upgrade to 30″
- 1199 – Bracket, offshore single engine 350HP ↑
- 1200B – Bracket, offshore for twin engine
- 1200C – Bracket, offshore with 1/2″ plate (Over 800 HP, twin engine)
- 1220 – Bracket, welded swim deck kicker (Port)
- 1270 – Brackets, welded down rigger (Pair at FWD stern rail)
- 1300 – Inside Passage bulkhead with footrest riser & extended sleeper cushion. (Port only) Curtain replaces Vberth doors & bulkhead.
- 1455 – Cabin aft overhang, extended to 36″ center length
- 1456 – Cabin aft overhang, raised 4″ & extended to 36″ center length
- 1500 – Door, walk thru bow (Cuddy & V-berth eliminated)
- 1530 – Door, side boarding (Port)
- 1542 – Trim lip, aluminum at rear cowling
- 1545 – Door, transom boarding (Starboard)
- 1621A – Rear cowling storage box, single with shoe box lid
- 1622A – Rear cowling storage box, two with shoe box lids
- 1760 – Fish boxes, side mounted floor w/ Forespar shut off ball valve (QTY 2)
- 1761A – Fish boxes, side mounted floor w/ Whale Gulper pumps (QTY 2)
- 1800 – Ladder, roof top (Port or Starboard)
- 1820 – Fold out steps, roof top access (QTY 2)
- 2121 – Rails, welded 6″ full wrap stern rails (Fore or aft of transom cowling)
- 2165C – Rod holder (QTY 3) welded to net holder (QTY 1) (Port and Starboard)
- 2200 – Rub Rails, (1 Port & 1 Starboard)
- 2200B – Rub rails, upper & lower (2 Port & 2 Starboard)
- 2220 – Rod holders, welded to fore side of roof top rod holder assembly (QTY 4)
- 2225 – Rose bud cleats, welded aft deck (QTY 4)
- 2285 – Insulate fish box sides and bottom (Per fish box option)
- 2600 – Frontier davit, at AKBH thru aft cabin overhang Includes: fabrication of davit, enclosure and paint (Dealer supplied winch / hauler)
- 2600B -Frontier davit, at AKBH thru aft cabin overhang Includes: fabrication of davit, enclosure and paint (Factory supplied Electro-Dyne winch / hauler)
- 2610 – Dinghy Hoist / Davit with winch #EMD2000SSRP (Thru aft cabin overhang) NOTE: Aft station option required.
- GX3 – Lone Star GX3 Drum Anchor Winch – up to 30ft.
- GX4 – Lone Star GX4 Drum Anchor Winch – up to 40ft.
- GX-A – Lone Star GX3 & GX4 Drum Anchor Winch Welded Provisions – ONLY
- SK-1 – Seakeeper 1, installed in floor fish hold (Shore power option required)
- SK-A – Welded structure provisions only for Dealer installed Seakeeper
- 5012 – Outrigger boss mounting plate (QTY 1) – AFT roof overhang Port & Starboard
- 273 – Cover, stern
- 330 – Cushions, sleeper custom (Requires opposing bench seat)
- 580 – Seat, flip up with snap on cushions (Each) (Aft deck)
- 625 – Swivels, installed on helm seats (Port & Starboard)
- 710 – Seat, Ocean Master
- 4060 – Color matched Zolatone (Cabin, gunwales & aft deck)
- 4115 – One color full side paint to chine
- 4135 – Two color side paint to chine
- 5089 – Alaskan Painted Trim Package – Lillith Zolatone w/flatclear (30-59)
- 3002 – Anchor windlass, Lofrans LION 1000 1/4″ horizontal gypsy
- 3002A – Foot switches for Lofrans LION 1000 windlass
- 3150A – Aerate, rear cowling storage box (Port)
- 3175 – Heater / defroster, Wallas Viking (7′ & 9′ cabin)
- 3220 – Light, LED rear deck (QTY 1)
- 3230 – Light, LED courtesy at aisle way (QTY 4)
- 3240 – Switch panel, additional eight switch panel
- 3245 – Bow thruster, Side Power SE40/125s single prop 88lb thrust – Includes: Joystick, GRP 27 Battery & 1 Bank charging system (Requires shore power)
- 3247 – Bow thruster, flat panel thruster control (second station)
- 3382 – Dual USB-A/C combo charger (Each) (Portside)
- 3400A – Pump, Whale Gulper pump for in-floor fish box (Single engine)
- 3400B – Pump, Whale Gulper pump for in-floor fish box (Twin engine)
- 3431 – Alarm, high water
- 3435 – Pump, bilge, second 2200 GPH bilge pump
- 3441 – Refrigerator, drawer Isotherm Cruise 65 SS, 2.3 Cu Ft., AC/DC (Requires 24″ cabinet)
- 3443 – Refrigerator, drawer Isotherm Cruise 130 SS w/Freezer, 4.6 Cu Ft., AC/DC NOTE: Requires 24″ cabinet and cannot have sink or stove above unit
- 3444 – Refrigerator, drawer Isotherm Cruise 85 SS, 3.0 Cu. Ft., AC/DC (Requires 24″ cabinet)
- 3600 – Shore power for 3 batteries with 3 bank charging system
- 3610 – Shore power and upgrade to 4 batteries with 4 bank charging system
- 3630 – Shore power, Freedom XC Pro Marine 2000w Inverter w/ 4 batteries & 4 bank charging system
- 3690 – Sink, large, w/ faucet & 10 gallon tank (Requires 24″ cabinet)
- 3691 – Sink, small, w/ faucet & 10 gallon tank (Requires 12″ cabinet)
- 3695 – Water tank, 18 gallon upgrade (Exch. 10 gallon tank)
- 3720B – Spotlight, Go Light Stryker with remote
- 3750 – Stove, Wallas Nordic Dt diesel with blower lid for cabin heat (Requires 24″ cabinet)
- 3751 – Diesel tank, 5 gal. aluminum tank w/ external fill & dash fuel gauge
- 3770 – Toilet, flushing centered inside cuddy
- 3820 – Water test, pre dealer delivery
- 3825 – Windshield wiper washer system
- 3830A – Fresh water system, wash down & 18 gallon tank
- 3830B – Fresh water system with sink & faucet, wash down & 18 gallon tank
- 3840 – Hot fresh water shower system, w/ S600EW heater, 30 gallon tank & drain sump
- 3845 – Head drain, with Attwood sump pump (Requires stand up head)
- 5006 – Bait tank plumbing and installation of Dealer supplied bait tank.
- 5006-A – Bait tank plumbing – Provisions Only.
- 5006-B – Bait tank wiring system to run continuously over night when at dock – Provisions Only.
- 5098 – Seakeeper Ride 450 (<26′)
- 5099 – Seakeeper Ride 525 (27′-30′)
- 5103 – Seakeeper Ride Keypad with Ethernet Cable – Choose MFD Cable: (Garmin, Ray Marine, or Simrad)
- 5108 – Sensar Marine – Boat Monitor with Bilge Sentry
- HS 1 – Hydraulic steering system, single main engine
- HS 2 – Hydraulic steering system, twin main engines
- HS YXC1 – Hydraulic steering system, Yamaha XC/XD single engine
- HS YXC2 – Hydraulic steering system, Yamaha XC/XD twin engines
- 170G-0FB.25 – 170 Gallon fuel tank & DELETE Fish hold (2500S with 7′ cabin only)
- 120G-36FB.27 – 120 Gallon fuel tank & 36″ Fish hold (2700S with 7′ cabin only)
- 200G-0FB.27 – 200 Gallon fuel tank & DELETE Fish hold (2700S with 7′ cabin only)
- 120G-24FB.27 – 120 Gallon fuel tank & 24″ Fish hold (2700S with 9′ cabin only)
- 170G-0FB.27 – 170 Gallon fuel tank & DELETE Fish hold (2700S with 9′ cabin only)
- 7′ CABIN
- CL 8610A – (1) Storage seat box (36″) w/cushion and back rest
- 9′ CABIN (Includes 9′ length upgrade)
- CL 8620A – (1) Storage seat box (60″) w/cushion and back rest (Aft of helm)
- CL 8620G – (1) Galley cabinet (36″) & (1) Stand up flushing toilet (24″) Aisle facing